Be aware, we are looking only for factory!
If you have a factory, send us your web-site add. so we can have a look at the product you sell. You want more detail info, have a look at the following:
Steel metal cutting band saw
Drive motor: 1hp or 1½hp, 1ph, 120volts/240volts, 60 Hz and 1725 rpm. Capacitor Start,
Manual reset
Automatic shut off swich
Blade size: 1'' * .032'' * 153 FPM
Gear Box: oil filled, sealed cast iron case, with 50/1 ration worm gear
Vice: quick setting vice, from 90° - 45°
Coolant system: 2.4 gpm pump, 2.8 Gallon reservoir, and shut-off valve
About the press
Garage Press, Arbour Press, Bearing Press
Those presses must be in between 30-150 ton
The small press (30-50 ton)
We hope to find manual pump with two speeds.
We hope to find pump with air system and one manual speed
Electric motor 120/240volts, 60 Hertz, single phase, hp must be decided by factory,
C.S.A. approved.
Pump dual action if possible.
The bigger press must be electric. (50-150ton)
We hope a motor 240 volts, single phase, 60 hertz; hp must be decided by factory.
Motor must be C.S.A. Approved if possible.
Pump dual action if possible.
If you can provide them for a very good price, including warranty well let us know.
Thank you for your time
Best Regards
Ms. Chenhui Li |
Buy The press & Cutting band saw [HK]
